Panasonic Lumix DMC-G85M - Manual (Page 38)

2. Getting Started/Basic Operations
38
∫ Notes on automatic viewfinder/monitor switching
Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the
viewfinder automatically when you bring your eye or an object near it.
•
If you enable the automatic viewfinder/monitor switching function and display the “On-monitor
recording information screen”
(P46) on the monitor, [Power Save LVF Shooting] in [Economy]
(P222) can be used, allowing you to reduce the battery consumption.
• Eye sensor might not work properly depending on the shape of your eyeglasses, the way you
hold the camera, or bright light shining around the eyepiece. In that case, press [LVF] to switch
the display.
• During motion picture playback or a slide show, the camera does not automatically switch the
display to the Viewfinder with the eye sensor.
• The eye sensor does not work depending on the angle of the monitor.
Setting the eye sensor sensitivity and the automatic switching of the display
between the Monitor and Viewfinder
> [Custom] > [Eye Sensor]
[Sensitivity] This will set the sensitivity of the eye sensor.
[LVF/Monitor
Switch]
This will set the method for switching between the monitor and viewfinder.
[LVF/MON AUTO] (automatic switching between the monitor and
viewfinder)/
[LVF] (viewfinder)/[MON] (monitor)
• If you press [LVF] to switch the display, the [LVF/Monitor Switch] setting will
also switch.
MENU