TA Triumph-Adler DCC 2725 - Manual (Page 150)

Copying Functions
4-28
7 Press [+] or [–] to input the area of the original to be
repeated.
With metric models, you can enter the border width
directly using the numeric keys after pressing [#-
Keys].
Y1: Length from top left of platen to top edge of
repeat area
X1: Length from Height from top left of platen to left
edge of repeat area
Y2: Height of repeat area
X2: Width of repeat area
8 Press [OK].
9 Press the Start key. Copying begins.