Auto image rotation, Negative image, Auto image rotation -37 negative image -37 – TA Triumph-Adler DCC 2725 User Manual
Page 159: Auto image rotation -37, Negative image -37
Copying Functions
4-37
4
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the loaded paper matches but the orientations
are different. The images will be rotated 90° counter-clockwise prior to copying.
NOTE:
To set Auto Image Rotation as the default mode, refer to Auto Image Rotation on page 8-22.
The procedure for making copies using Auto Image Rotation is explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Auto Image
Rotation].
4
Press [On] to select Auto Image Rotation.
5
Press [OK].
6
Press the Start key to start copying.
Negative Image
Inverts black and white portions of the image for printing.
NOTE:
This function is only available for black and white copy mode.
Use the procedure below to make negative image copies.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Negative
Image].
4
Press [On] to select Negative Image.
5
Press [OK].
6
Press the Start key to start copying.