TA Triumph-Adler DCC 2725 - Manual (Page 27)

xxv
Energy Saving Control Function
The device comes equipped with a Low Power Mode where energy consumption is reduced after a certain
amount of time elapses since the device was last used, as well as a Sleep where printer and fax functions
remain in a waiting state but power consumption is still reduced to a minimum when there is no activity with the
device within a set amount of time.
Low Power Mode
The device automatically enters Low Power Mode when 3 minutes for 25/25 ppm, 30/30 ppm, 40/40 ppm and
50/40 ppm models, or 5 minutes for 55/50 ppm model have passed since the device was last used. The amount
of time of no activity that must pass before Low Power Mode is activated may be lengthened. For more
information refer to Low Power Mode and Auto Low Power Mode on page 2-9.
Sleep
The device automatically enters Sleep when 30 minutes for 25/25 ppm and 30/30 ppm models, 45 minutes for
40/40 ppm model, or 60 minutes for 50/40 ppm and 55/50 ppm models have passed since the device was last
used. The amount of time of no activity that must pass before Sleep is activated may be lengthened. For more
information see Sleep and Auto Sleep on page 2-10.
Automatic 2-Sided Copy Function
This device includes 2-sided copying as a standard function. For example, by copying two 1-sided originals onto
a single sheet of paper as a 2-sided copy, it is possible to lower the amount of paper used. For more information
see Duplex Copying on page 3-12.
Paper Recycling
This device supports the recycled paper which reduces the load on the environment. Your sales or service
representative can provide information about recommended paper types.
Energy Star (ENERGY STAR
®
) Program
We have determined as a participating company in the International Energy Star Program that
this product is compliant with the standards laid out in the International Energy Star Program.