TA Triumph-Adler DCC 2725 - Manual (Page 348)

Troubleshooting
10-12
1104 Failed to send the e-mail. Check the e-mail address.
* If the address is rejected by the
domain, you cannot send the e-mail.
3-25
Failed to send i-FAX. Check the i-FAX address.
*If the address is rejected by the
domain, you cannot send i-FAX.
FAX System (S)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
1105 Failed to send via SMB. Select [On] of the SMB settings on
the Embedded Web Server. 2-18
Failed to send the e-mail. Select [On] of the SMTP settings on
the Embedded Web Server.
Failed to send via FTP. Select [On] of the FTP settings on the
Embedded Web Server.
Failed to send i-FAX. Select [On] of the i-FAX settings on
the Embedded Web Server. FAX System (S)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
1106 Failed to send the e-mail.
Failed to send i-FAX. Check the sender address of SMTP
on the Embedded Web Server. 2-18
1131 Failed to send via FTP. Select [On] of the secure protocol
settings on the Embedded Web
Server. 2-18
1132 Failed to send via FTP. Check the followings of the FTP
server.
- Is FTPS available?
- Is the encryption available? 2-18
2101 Failed to send via SMB.
Failed to send via FTP. Check the network and SMB settings.
Check the network and FTP settings.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
- Host name and IP address
- Port number 2-18
Failed to send the e-mail.
Failed to send i-FAX. Check the network and Embedded
Web Server.
- The network cable is connected.
- The hub is not operating properly.
- POP3 server name of the POP3
user
- SMTP server name
Error
Code
Error Message Corrective Actions Reference Page