TA Triumph-Adler DCC 2725 - Manual (Page 216)

Document Box
6-16
3 Use the [+] and [–] keys or the numeric keys to
enter the maximum number of stored jobs.
You can enter any number between 0 and 50.
NOTE: If you enter a value of 0 (zero), no jobs are
stored.
4 Press [OK]. The maximum number of stored jobs is
set.
Printing a Document
You can print the documents stored in the Repeat Copy box.
Use the procedure below to print a document.
1 Press the Document Box key.
2 Press [Job Box].
3 Select [Repeat Copy] box, and press [Open].
4 Select the document to print and press [Print].
5 If the document is protected by a password, enter
the password using the numeric keys.
6 Press [Start Print] to start printing.
The Repeat Copy box job will be deleted when the
main power switch is turned off.
Document Box/Removable Memory - Repeat Copy Job Retention
Set the maximum number of repeat copy jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
(0 - 50)
32
Cancel OK
Status 10/10/2008 10:10
job(s)
Job Box.
Name Date and Time Size
1010200800101002 10/10/2008 10:00
1/1
Detail
Print
Close
Delete
Repeat Copy
MB 21
Status 08/08/2009 10:10