TA Triumph-Adler DCC 2725 - Manual (Page 343)

Troubleshooting
10-7
10
Cannot duplex print
on this paper. Did you select a paper size/
media type that cannot be
duplex printed? Select the available paper type.
Press [Continue] to print without
using Duplex. 3-12
Cannot execute this
job. – This job is canceled because it is
restricted by Job Accounting. Press
[End]. —
Cannot offset this
paper. Did you select a paper size/
media type that cannot be
offset? Select the available paper size/type.
Press [Continue] to print without
using Offset. 3-14
Cannot print the
specified number of
copies. – Only one copy is available due to
processing too many jobs in parallel.
Press [Continue] to continue printing.
Press [Cancel] to cancel the job. —
Cannot staple at the
specified position. Have you selected a
position that cannot be
stapled? Select a position that can be stapled.
Press [Continue] to print without
using Staple. —
Cannot staple this
paper. Did you select a paper size/
type that cannot be stapled? Select the available paper size/type.
Press [Continue] to print without
using Staple. —
Check the cover. Is there any cover which is
open? Close the cover indicated on the
touch panel. —
Check the document
processor. Is the document processor
open? Close the document processor. —
Is the top cover of the
document processor open? Close the top cover of the document
processor. 10-28
Check the finisher. Is the document finisher set
correctly? Set the document finisher correctly.
For details, refer to the respective
Operation Guides. —
Clean the slit glass. – Clean the slit glass using the cleaning
cloth supplied with the document
processor. 9-3
Confidential
document is
detected. – The machine detects the documents
guard pattern. The scanned
document is printed in blank and
sending of the document is canceled. 8-81
Failed to specify Job
Accounting. – The job is canceled. Press [End]. —
Failed to store job
retention data. – The job is canceled. Press [End]. —
Error Message Checkpoints Corrective Actions
Reference
Page