Basic operation 3-13, Press the copy key, Place the originals on the platen – TA Triumph-Adler DCC 2725 User Manual
Page 85: Press [layout/edit] and then [duplex, Select the desired duplex option
Basic Operation
3-13
3
Book to One-sided
Produces a 1-sided copy of a 2-sided or open book
original.
The following binding options are available.
•
Binding Left: Originals with facing pages are
copied from left to right.
•
Binding Right: Originals with facing pages are
copied from right to left.
NOTE:
The following sizes of originals and paper are
supported in Two-sided to One-sided and Book to One-
sided. Original: Ledger, Letter-R, A3, B4, A4-R, B5-R,
A5-R and 8K. Paper: Letter, A4, B5 and 16K. You may
change paper size and reduce or enlarge copy to
match that size.
Book to Two-sided
Produces two-sided copies from an open book original
with facing pages.
NOTE:
The following sizes of originals and paper are
supported in Book to Two-sided mode. Original:
Ledger, Letter-R, A3, B4, A4-R, B5-R, A5-R and 8K.
Paper: Letter, A4 and B5.
The procedure for using two-sided/duplex copying is explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Duplex].
4
Select the desired Duplex option.
5
If you choose [1-sided>>2-sided] or
[2-sided>>2-sided], select the binding edge of the
finished copies of Finishing.
If you choose [Book>>2-sided], press [Book>>2-
sided] or [Book>> Book] of Finishing to select the
setting for duplex.
2
1
2
1
Original
Copy
3
4
3
4
3
4
2
1
2
1
4
3
1
2
1
2
1
0
2
3
2
1
3
0
Original
Copy
Facing pages
-> Two-sided
Facing pages
-> Facing pages
Status
10/10/2008 10:10
Ready to copy.
Copies
Cancel
OK
Duplex
Add Shortcut
Book
>>2-sided
1-sided
>>2-sided
Original
Orientation
1-sided
>>1-sided
2-sided
>>2-sided
Finishing
Binding
Left/Right
Binding
Top
2-sided
>>1-sided
Book
>>1-sided
Original
Zoom
Paper
:
:
:
---
---
100%
Preview
Place original.
Top Edge Top