TA Triumph-Adler DCC 2725 - Manual (Page 251)

Default Setting (System Menu)
8-11
8
If you select [Adjust Print Direction], load paper according to the steps below.
Example: copying on Letterhead
NOTE: When loading cover paper in a cassette or multi purpose tray, load the face, on which printing is
supposed to be done, upward.
Use the procedure below to specify the actions performed for special paper types.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original / Paper Settings , [ ] and then [Change] of Special Paper
Action.
3 Select [Adjust Print Direction] or [Speed Priority].
4 Press [OK].
Switching Unit of Measurement
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1 Press the System Menu key.
2 Press [Common Settings] and then [Change] of Measurement.
3 Select [mm] for metric or [inch] for inch.
4 Press [OK].
Original
Original
Finished
Finished
Cassette
Cassette
Multi Purpose Tray
Multi Purpose Tray
Paper
Paper