TA Triumph-Adler DCC 2725 - Manual (Page 74)

Basic Operation
3-2
Login/Logout
If user login administration is enabled, it is necessary to enter the login user name and password to use the
machine.
NOTE: You will be unable to login if you forget your login user name or login password. In this event, login with
administrator privileges and change your login user name or login password.
Login
1 If the screen shown appears during operations,
press [Login User Name].
Press [# Keys] to enter the login data using the
numeric keys.
2 Enter the login user name and press [OK].
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
3 Press [Login Password].
Press [# Keys] to enter the login data using the
numeric keys.
4 Enter the password and press [OK].
5 Check the login user name and password are
correct, and press [Login].
NOTE: If Network Authentication is selected as the
user authentication method, either Local or Network
can be selected as the authentication destination.
Logout
To logout from the machine, press the Logout key to
return to the login user name/password entry screen.
Login
User Name
Login
Status 10/10/2008 10:10
Enter login user name and password.
Login
Password
abcdef
********
Login to: Local
# Keys
IC Card
Login
Cancel Check Counter
# Keys