TA Triumph-Adler DCC 2725 - Manual (Page 188)

Sending Functions
5-20
Background Density Adjustment
Lightens the background of the colored original when it is too dark.
NOTE: You cannot adjust the background density if you selected [Black & White] in Color / Grayscale / Black
and White Selection (see page 5-21).
Use the procedure below to set the background density when sending scanned images.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then [Background
Density Adj.].
4 Press [On], and press [1] to [5] (Lighter - Darker) to
adjust the background density.
5 Press [OK].
6 Specify the destination, and press the Start key to
start sending.
On
Off
Background
Background Density Adj.
Lighter Darker
Preview
Original
Zoom
Send
100%
---
:
:
: ---
Place original.
Cancel OK Add Shortcut
Status 08/08/2009 10:10
Place original.
Ready to send. Destination
1 2 3 4 5