TA Triumph-Adler P-C2660i MFP - Manual (Page 269)

9-13
Setup, Registration, and User Management > System Menu
* If you want to enable the changed defaults immediately, move to the function screen and press the Reset key.
Preset Limit
Error Handling
Measurement
Low Toner Alert Level
Detail Settings —
Image Quality Set the default value for the image quality adjustment range when selecting the file format with
which to send and store images.
Value : 1 Low (High Comp.), 2, 3, 4, 5 High (Low Comp.)
PDF/A Set the default value for PDF/A when selecting the file format with which to send and store
images.
Value : Off, PDF/A-1a, PDF/A-1b
High Comp. PDF Set the default value for high compressed PDF when selecting the file format with which to
send and store images.
Value : Compression Ratio Priority, Standard, Quality Priority
Item Description
Preset Limit Restrict the number of copies that can be made at one time.
Value : 1 to 999 copies.
Item Description
Duplexing Error Select what to do when duplex printing is not possible for the selected paper size and media
type.
Value
1-sided: Printed in 1-sided
Display Error: Error message to cancel printing is displayed.
Paper Mismatch Error Select what to do when the selected paper size or type does not match paper size or type
loaded in the specified paper source while printing from the computer by specifying the
cassette or multi-purpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Error message to cancel printing is displayed.
Item Description
Measurement Select inch or metric for the unit for paper dimensions.
Value : mm, Inch
Item Description
Low Toner Alert Level Set the amount of remaining toner to alert low toner.
Value : Off, On
NOTE: Selecting [Off] alerts you low toner when the amount of remaining toner becomes 5%.
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to
100% (in 1% increments).
Item Description