TA Triumph-Adler P-C2660i MFP - Manual (Page 32)

1-8
Preface > Legal and Safety Information
Energy Saving Control Function
The device comes equipped with a Low Power Mode where energy consumption is reduced after a certain amount of
time elapses since the device was last used, as well as a Sleep where printer and fax functions remain in a waiting state
but power consumption is still reduced to a minimum when there is no activity with the device within a set amount of
time.
Low Power Mode
The device automatically enters Low Power Mode when 1 minute has passed since the device was last used. The
amount of time of no activity that must pass before Low Power Mode is activated may be lengthened. For more
information refer to Low Power Mode on page 2-27.
Sleep
The device automatically enters Sleep when 15 minutes have passed since the device was last used. The amount of
time of no activity that must pass before Sleep is activated may be lengthened. For more information refer to Sleep and
Auto Sleep on page 2-28.
Automatic 2-Sided Copy Function
This device includes 2-sided copying as a standard function. For example, by copying two 1-sided originals onto a single
sheet of paper as a 2-sided copy, it is possible to lower the amount of paper used. For more information refer to Duplex
on page 4-7.
Paper Recycling
This device supports the recycled paper which reduces the load on the environment. Your sales or service
representative can provide information about recommended paper types.
Energy Star (ENERGY STAR®) Program
We have determined as a company participating in ENERGY STAR that this product has earned the
ENERGY STAR.