Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 127
Advertising
127
1.
Turn on the projector and display an image.
2.
Adjust the image size using the
W
(Wide) and
T
(Tele) buttons.
After you adjust the image size, the Image Shift screen is displayed automatically.
3.
Use the arrow buttons on the projector or remote control to adjust the image position.
Note:
You can also use the Installation menu to adjust the
Image Shift
setting.
4.
Press
Esc
to close the Image Shift screen. The screen closes if no operation is performed for
approximately 10 seconds.
Note:
The Image Shift setting is retained even if the projector is turned off; however, you need to
readjust the image position if you change the projector's location or angle.
Parent topic:
Using Basic Projector Features
Related references
Advertising