Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 262)

262
7. Select one of the following under Range :
• All to attach all the pages in the current whiteboard session (PDF or EWF2 format)
• Current to attach only the current whiteboard page
8. When you are ready to email the whiteboard pages, select Send .
Parent topic: Whiteboard Mode
Using BrightLink Without a Computer
You can use the pens and your fingers to write or draw on the projection surface simultaneously without
connecting a computer (PC Free annotation). This lets you annotate images from a document camera,
iPad, DVD player, or other source.
Note: A Touch Unit is optional for the BrightLink 1480Fi and must be installed for finger touch operation.
These two modes are available:
• Built-in annotation mode displays the built-in toolbar on whatever image is being projected from a
document camera, iPad, or other source.
• Built-in Whiteboard mode lets you project a white screen or one of 6 background patterns in 3 colors,
and use the toolbar to write or draw as you would on a chalkboard or dry erase board.
Using the Built-in Annotation Mode
Built-in Tools for Use Without a Computer
Controlling an Epson Document Camera
Parent topic: Using the Interactive Features
Using the Built-in Annotation Mode
You can use either pen with the built-in toolbar, both pens at the same time, your finger, or a combination
of both pen and finger touch.
Note: Make sure the Drawing Function setting is set to On in the projector's Interactive menu.
1. Make sure your device is connected and select the input source you want to display.
You see the toolbar at the bottom of the projected image.
2. To move the toolbar to the right, left, top, or bottom of the screen, use the pen or your finger to drag it
to the desired location.