Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 40)

40
Connecting to Computer Sources
Connecting to Video Sources
Connecting External Output Devices
Connecting a Microphone
Connecting to External USB Devices
Connecting to a Document Camera
Connecting a Printer to the Control Pad
Connecting Multiple Projectors of the Same Model
Parent topic: Setting Up the Projector
Related references
Additional Components
Installation Settings - Installation Menu
Connecting to Computer Sources
Follow the instructions in these sections to connect a computer to the projector.
Connecting to a Computer for USB Video and Audio
Connecting to a Computer for VGA Video
Connecting to a Computer for HDMI Video and Audio
Connecting to a Computer for Pen and Finger Use
Connecting a Computer to the Control Pad
Connecting to a Computer for Sound
Parent topic: Projector Connections
Connecting to a Computer for USB Video and Audio
If your computer meets the system requirements, you can send video and audio output to the projector
through the computer's USB port (preferably USB 2.0). Connect the projector to your computer using a
USB cable.
Note: This also lets you use the interactive pens with your computer. You need to change the USB
Display setting to On in the projector's Signal I/O menu before you can project through the USB port.
Note that using USB Display will slow interactive pen function. For the best performance, VGA or HDMI
connections are recommended.