Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 291)

291
Setting Options Description
Auto Power On HDMI1
Computer1
USB Display
Off
Selects whether to automatically
turn on the projector when you
connect an input signal to a
specific input source
If you select HDMI1 , set the
method for automatically turning
on the projector in the Power On
Trigger setting.
Power On Trigger Plug-in Detection
Signal Detection
Sets the way the projector turns
on when Auto Power On is set to
HDMI1 .
Plug-in Detection : automatically
turns the projector on when it
detects a connected device is
turned on
Signal Detection : automatically
turns the projector on when an
HDMI signal is detected
Note: When Signal Detection is
selected, the power used in
standby mode increases.
Sleep Mode On
Off
Automatically turns off the
projector after an interval of
inactivity
Sleep Mode Timer 1 to 30 minutes Sets the time before the projector
automatically turns off (
Sleep
Mode must be turned on)
A/V Mute Timer On
Off
Automatically turns off the
projector after 30 minutes of
inactivity