Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 153)

153
Note: The Quick Startup setting is displayed only if the A/V Output setting in the Signal I/O menu is set to
While Projecting , the Auto Power On setting in the Network menu is set to Off , and the Power On
Trigger setting in the Operation menu is set to Plug-in Detection .
1. Turn on the projector.
2. Press the Menu button.
3. Select the Operation menu and press Enter .
4. Select the Quick Startup setting and press Enter .
5. Select how long you want to enable Quick Startup mode for and press Enter .
6. Press Menu or Esc to exit the menus.
Press the power button to quickly restart the projector in this mode.
Parent topic: Using Basic Projector Features