Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 53)

53
You can project slide shows from image files on a connected USB device.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slideshow
Connecting a USB Device or Camera to the Projector
You can connect your USB device or camera to the projector's USB-A port and use it to project images
and other content.
1. If your USB device came with a power adapter, plug the device into an electrical outlet.
2. Connect the USB cable (or USB flash drive) to one of the projector's USB-A ports.
Note: Use the USB cable supplied with or specified for use with your device. Do not connect a USB
hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slideshow
Connecting a USB Device to the Control Pad
You can connect your USB device to the USB-A port on the control pad (BrightLink 1485Fi) and use it to
project images and other content.
1. If your USB device came with a power adapter, plug the device into an electrical outlet.
2. Connect a USB cable to either USB-A port on the projector and to the upper USB-B port on the
control pad.
3. Enable Connect ELPHD02 in the HDBaseT settings of the projector's Signal I/O menu.