Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 175
Advertising
175
Note:
You cannot adjust the black levels while projecting a test pattern, and you may not be able to
adjust the black levels correctly if the
Geometry Correction
settings are set too high. The brightness
and tone of the overlapping areas may differ from the rest of the image even after adjusting the black
level.
1.
Press the
Menu
button.
2.
Select the
Multi-Projection
menu and press
Enter
.
3.
Select the
Black Level
setting and press
Enter
.
Note:
The
Black Level
setting is displayed only if
Edge Blending
is enabled and at least one (top,
bottom, left, right) edge is set to
On
.
4.
Select the
Color Adjustment
setting and press
Enter
.
You see a screen based on the
Top Edge
,
Bottom Edge
,
Right Edge
, and
Left Edge
settings you
selected for the
Edge Blending
setting.
Advertising