Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 77
Advertising
77
5.
Select the
Network
menu and press
Enter
.
6.
Select
Network Settings
and press
Enter
.
7.
Select
Projector Name
and enter a name up to 16 alphanumeric characters long to identify the
projector on the network.
8.
Set the
Priority Control Interface
setting to
Wireless LAN
.
9.
Select the connection method:
• To connect directly to a wireless device (Simple AP mode), set the
Simple AP
setting to
On
and
go to step 16.
• To connect to a device via a wireless network router (infrastructure mode), set the
Simple AP
setting to
Off
and go to the next step.
• If you installed the optional wireless LAN module and want to use both connection methods, set
the
Simple AP
setting to
On
and go to the next step.
Advertising