Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 228
Advertising
228
10. Touch each of the four yellow circles on the screen and verify that the gray touch indicator appears
in the correct position.
Note:
Finger touch operations may not function correctly if you are wearing bandages, artificial nails,
nail polish, or anything else that may obstruct your fingers.
If the gray indicators do not appear where you touched the screen, you need to manually adjust the
touch unit alignment.
11. Select
Up
using the remote control or control panel and press
Enter
.
Try touching the four dots again and repeat this process until the touch indicators appear in the
correct position.
12. When you are finished with adjustments, select
Close
.
Parent topic:
Advertising