Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 292)

292
Setting Options Description
Standby Mode Communication On
Communication Off
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to
Always On )
Port Wired LAN
Wireless LAN
Selects the port to use while the
Standby Mode setting is set to
Communication On
Quick Startup 20min.
60min.
90min.
Off
Sets the time period for which
you want to be able to restart the
projector within five seconds of
turning it off (Quick Start mode).
Make sure to first set A/V Output
to
While Projecting , Auto Power
On to Off , and Power On Trigger
to Plug-in Detection . It may take
longer than five seconds when
projecting from the projector's
USB or HDMI Out ports, when
using the Screen Mirroring
features, if whiteboard sharing
was ended in the previous
session, or if you want to restore
the whiteboard contents from the
previous session.
Closed Caption CC1
CC2
Off
Enables and selects the type of
closed captions to display
Indicators On
Off
Enables or disables the status
indicator lights on the projector