Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 340)

340
Power light Status light Laser light Temp light Status and solution
Varies Varies Fast
flashing
orange Fast flashing
orange The batch setup file is corrupt or the
USB flash drive is connected
incorrectly. Disconnect the USB flash
drive and turn off the projector.
Unplug the projector, plug it in again,
and try again.
Fast flashing
blue Fast flashing
blue Fast
flashing
orange Fast flashing
orange Writing the menu settings has failed
and an error in the projector's
firmware has occurred. Turn the
projector off, unplug it, and contact
Epson for help.
Wireless LAN Light Status
The Wireless LAN light indicates the following:
• Blue : Wireless LAN is available and operating normally
• Flashing blue (quickly) : Connecting to a device
• Flashing blue (slowly) : An error has occurred. Turn off the projector and restart it
• Off : Wireless LAN is not available. Make sure the Wireless LAN Power setting is set to On in the
projector's Management menu
Note: If the lights display a pattern not listed in the tables above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Where to Get Help (U.S. and Canada)
Feature Settings - Operation Menu
Administration Settings - Management Menu
Using the Projector Menu Displays
The projector displays descriptions in the menu system to help you navigate the projector's settings. The
descriptions appear on the right side of the screen as you scroll the menu settings.
Parent topic: Solving Problems