Solutions when "no signal" message appears – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 343
343
• Make sure the
USB Display
setting is set to
On
in the projector's Signal I/O menu.
• On a Mac, select the
USB Display
icon in the Dock or from the
Applications
folder. If you select Exit
from the USB Display icon menu in the Dock, USB Display does not start automatically when you
connect the USB cable.
• For images projected with Windows Media Center, reduce the screen size from full screen mode.
• For images projected from applications using Windows DirectX, turn off DirectX functions.
• If the mouse cursor flickers, select
Make the movement of the mouse pointer smooth
in the Epson
USB Display Settings program on your Windows computer.
• Turn off the
Transfer layered window
setting in the Epson USB Display Settings program on your
Windows computer.
• If you change the computer resolution during projection, the video quality and performance may
decline.
• Make sure you are using the most recent version of the USB Display software. You can download the
latest version from the Epson web site. Go to
(U.S.) or
(Canada)
and select your projector.
Parent topic:
Solving Image or Sound Problems
Related references
Input Signal Settings - Signal I/O Menu
Related tasks
Selecting an Image Source
Connecting to a Computer for USB Video and Audio
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the
Source Search
button and wait a few seconds for an image to appear.
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• If you are projecting from an HDMI source, change the
HDMI EQ Setting
setting in the projector's
Signal I/O menu.