Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 81
![background image](/files/868833/content/doc081.png)
81
Setting
Options
Description
SSID
Up 32 alphanumeric characters
Manually set the SSID (network
name) of the wireless LAN
system the projector is
connecting to
Security
WPA2/WPA3-PSK
WPA2/WPA3-EAP
WPA3-PSK
WPA3-EAP
Open
Selects the type of security used
on the wireless network
WPA2/WPA3-PSK
: uses
WPA2/WPA3 personal mode;
encryption is dependent on the
access point settings;
Passphrase
must be the same
as the access point
WPA2/WPA3-EAP
: uses
WPA2/WPA3 enterprise mode;
encryption is dependent on the
access point settings
WPA3-PSK
: uses WPA3 security
with AES for encryption. Use the
Passphrase
value to establish a
connection from a computer
WPA3-EAP
: uses WPA3
enterprise mode; encryption is
dependent on the access point
settings
Passphrase
Various passphrases from 8 to
32 characters (from a web
browser, the maximum is 63
characters)
Selects the pre-shared key used
on the network; passphrases are
case-sensitive. If the network
settings are reset after the
passphrase has been changed
more than once, the first
passphrase is restored. This
setting is only displayed when
Security
is set to
WPA3-PSK
or
WPA2/WPA3-PSK
.