Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 263)

263
3. Select the drawing tool you want to use from the toolbar and annotate the projected screen using the
interactive pens or your fingers.
4. To minimize the toolbar, select the Minimize icon on the right side of the toolbar.
Parent topic: Using BrightLink Without a Computer
Built-in Tools for Use Without a Computer
The built-in annotation toolbar is embedded in the projector and allows you to draw and write on the
projected screen. Make sure the
PC Interactivity setting on the toolbar is disabled, if it appears.
Note: A mini toolbar also appears when you press the button on the interactive pen anywhere in the
drawing area. You can use the mini toolbar to switch the type of pen or eraser. You can change the
function of the button by changing the
Pen Button Function setting in the Interactive menu.
Displays the Home screen.
Toggles the video and audio off and on.
Enlarges or reduces the projected image (not available when the screen is split into halves or
quarters).
Captures the current screen and copies it to the whiteboard.
Full Screen captures the entire screen.
Select Area lets you select a portion of the image to capture.
Note: If you want to capture the Screen Mirroring image, set Capture to Enabled in the
projector's Network > Network Settings > Network Projection menu.
Splits the screen and displays the whiteboard source with the current source (not available
when the screen is split into halves or quarters or when the
Scale setting is on.).
Specifies the split screen settings (available only when you have split the screen into halves
or quarters).
Specifies the horizontal position of the image inside the ultra-wide display (available only
when
Screen Type is set to 16:6 [BrightLink 1485Fi]).