Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 46)

46
2. Connect the other end to the Audio port that corresponds to the Computer port you are using.
Parent topic: Connecting to Computer Sources
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the projector.
Connecting to an HDMI Video Source
Connecting to a Composite Video Source
Connecting to a Video Source for Sound
Parent topic: Projector Connections
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.
The HDMI connection provides the best image quality. You can also connect your video source to an
HDMI port on the control pad (BrightLink 1485Fi).
Caution: Do not turn on the video source before connecting it to the projector. Doing so could damage
the projector.
Note: If you are connecting a video source to an HDMI port on the control pad, enable Connect
ELPHD02 in the HDBaseT settings of the projector's Signal I/O menu.
1. Connect the HDMI cable to your video source's HDMI output port.