Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector - Manual (Page 44)

44
1. Connect the USB cable to your projector's USB-B1 port.
Note: If your computer is connected to the projector's HDMI3 port, connect the USB cable to the
projector's USB-B2 port. You can change the HDMI port associated with the USB-B2 port by
changing the USB-B2 setting in the projector's Pen/Touch > PC Interactivity menu.
2. Connect the other end to any available USB port on your computer.
Parent topic: Connecting to Computer Sources
Related references
Pen and Touch Setup Settings - Pen/Touch Menu
Connecting a Computer to the Control Pad
If your computer has an HDMI port, you can connect it to the projector's control pad (BrightLink 1485Fi)
using an HDMI cable.
Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for
video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port.
Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support
audio through the HDMI port.
1. Turn on your projector and computer, if necessary.
2. Enable Connect ELPHD02 in the HDBaseT settings of the projector's Signal I/O menu.