Selecting the connected usb source – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 54
54
4.
Connect the USB cable for the device (or a USB flash drive ) to the
USB-A
port on the bottom of the
control pad.
5.
Connect the other end of the cable (if applicable) to your device.
Note:
You can also connect a USB device directly to one of the projector's
USB-A
ports.
Parent topic:
Connecting to External USB Devices
Related tasks
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to one of the
USB-A
ports. To display
the connected USB device, select the
USB1
source.
Note:
If you have connected a document camera using a USB cable, select the
USB2
source.
1.
Make sure the connected USB source is turned on, if necessary.
2.
Press the
USB
or
Source Search
button on the remote control and select the
USB1
or
USB2
source.
Parent topic: