Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 349
349
Solutions When the Image Brightness or Colors are Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Press the
Color Mode
button on the remote control to try different color modes for the image and
environment.
• Check your video source settings.
• Adjust the available settings on the Image menu for the current input source, such as
Brightness
,
Contrast
,
Tint
,
White Balance
,
Color Saturation
and
RGBCMY
.
• Make sure you selected the correct
Signal Format
or
EDID
setting in the Signal I/O menu, if available
for your video source.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
• Make sure you have run the
Light Source Calibration
in the Management menu recently. If using
multiple projectors, perform the calibration on all projectors to ensure a consistent image quality.
• When using multiple projectors and the color of the projected image does not match between the
projectors, set Color Mode to
Multi-Projection
and adjust the Color Uniformity, Light Source
Brightness Control, Color Matching, Black Level, and RGBCMY settings to resolve the color
differences.
Parent topic:
Solving Image or Sound Problems
Related references
Input Signal Settings - Signal I/O Menu
Feature Settings - Operation Menu
Administration Settings - Management Menu
Image Quality Settings - Image Menu
Multiple Projector Operation Settings - Multi-Projection Menu
Solutions When an Afterimage Remains On the Projected Image
If you see an afterimage in the projected image, select
Refresh Mode
>
Start
in the Management menu.
Parent topic:
Solving Image or Sound Problems
Related references