Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 211
211
Related references
Interactive Settings - Interactive Menu
Drawing on a Projected Image (Built-in Annotation Mode)
You can project from a computer, tablet, video device, or other source and annotate over your projected
content using the interactive pens or your finger. You can use one pen, both pens at the same time, or a
combination of pens and finger touch.
Note:
A Touch Unit is optional for the BrightLink 1480Fi and must be installed for finger touch operation.
1.
Project an image from a connected device.
You see the toolbar on the bottom of the projected image.
2.
To move the toolbar to the right, left, top, or bottom of the screen, use the pen or your finger to drag it
to the desired location.
3.
To switch to one of the other interactive modes, do one of the following:
• To split the screen with whiteboard mode, select the
Whiteboard
icon on the toolbar.
• To switch to PC Interactive mode, switch to the input source for the connected computer or select
the
PC Interactivity
icon on the toolbar and make sure it is set to
On
if the
computer is already connected.