Epson EpiqVision Ultra LS800 4000-Lumen Pixel-Shift 4K UHD Ultra-Short Throw Laser 3LCD Smart Home Theater Projector (Black) User Manual
Page 114
114
• Press the
blank button on the remote control to see if the image was temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
• Try using a shorter HDMI cable.
• Try connecting the video source directly to the projector.
• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected
computer is in sleep mode or displaying a blank screen saver.
• If you are projecting from a streaming device, make sure its power cable is connected to the
DC Out
(2.0A)
USB port on the projector. Turn on the connected streaming device or video source, and press
the play button to start a video, if necessary.
• Make sure the connected device meets the HDMI CEC standard. See the documentation supplied
with the device for more information. If necessary, set the CEC function for the connected device
again and restart the device. Turn off the projector and the connected streaming device or video
source, and then turn them back on.
• Turn off the projector and the connected streaming device or video source, and then turn them back
on.
• If the projector does not respond when you press buttons on the remote control, make sure the remote
and projector are within range of each other.
• If you are projecting from a computer, make sure it is set up to display on an external monitor. If the
computer's display is set to an extended or mirrored mode, try changing it to external output only.
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency
limits. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)
• Check the video copyright protection and encryption. The projector may not be able to project
copyrighted videos with updated or revised versions of HDCP encryption.
• If you are trying to view online content, make sure you have an active Internet connection.
• Make sure you selected the correct
EDID
setting in the projector's Picture menu, if available for your
image source.
• When sending 18 Gbps images such as 4K 60 Hz, use an HDMI cable (premium high-speed).
• If the other solutions do not solve the problem, reset all of the projector settings using the option in the
Settings
menu.
Parent topic: