Epson EpiqVision Ultra LS800 4000-Lumen Pixel-Shift 4K UHD Ultra-Short Throw Laser 3LCD Smart Home Theater Projector (Black) User Manual
Page 119
119
Note:
To avoid condensation on the projection window after bringing the projector in from a cold
environment, let the projector warm up to room temperature before using it.
• Position the projector close enough to the screen.
• Adjust the
Sharpness
setting to improve image quality.
• If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to
match the projector's native resolution, if possible.
• If you blurred the edges of the projected image using the Edge Blur function, press the
Flexible Picture menu button on the remote control to display the Flexible Picture menu, and then
press the
blank button to disable the function.
Parent topic:
Solving Image or Sound Problems
Related concepts
Related references
Image Quality Settings - Picture Menu
Supported Video Display Formats
Related tasks
Cleaning the Projection Window
Focusing the Image
Solutions When the Image Brightness or Colors are Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Try selecting a color mode that best fits the image and environment.
• Check your video source settings.
• Try adjusting the
Scene Adaptive Gamma
,
Custom Settings
,
Color Temperature
,
Frame
Interpolation
,
Dynamic Contrast
,
Noise Reduction
,
Super-resolution
,
Auto Contrast
Enhancement
, and
Aspect Ratio
settings in the Picture menu for the current input source.
• Make sure you selected the correct
HDMI Video Range
,
HDR
, or
EDID
settings in the Picture menu, if
available for your image source. You can make the image brighter by setting
HDR
to a lower number.
• When you are projecting your image onto a wall, try different wall color types for the image and
environment by selecting the
Adjust color
setting in the Installation menu.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.