Epson EpiqVision Ultra LS800 4000-Lumen Pixel-Shift 4K UHD Ultra-Short Throw Laser 3LCD Smart Home Theater Projector (Black) User Manual
Page 44
44
2.
When the pairing screen is displayed, press and hold the
Enter
and
home remote control buttons
at the same time.
The light on the remote control flashes until pairing is complete.
3.
Use the remote control directional pad and
Enter
buttons to select the language you want to use
from the language selection screen.
4.
Do one of the following:
• Select
Continue
to use an Android phone to set up the projector's Wi-Fi and Google account
settings. Follow the on-screen instructions and skip to step 7.
• Select
Skip
to set up the projector's Wi-Fi and Google account settings manually. Go to the next
step.
5.
Select the wireless network you want to use from the Wi-Fi setting screen and then follow the on-
screen instructions to enter the network password.
6.
At the Google account sign-in screen, do one of the following:
• Select
Sign In
to sign-in to your Google account. Follow the on-screen instructions.
• Select
Skip
to use the projector without signing in to a Google account.
7.
Follow the on-screen instructions to proceed with initial setup, selecting settings as desired.
The Home screen is displayed when initial setup is completed.
Parent topic: