Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 101)

96
Click to add a monitoring rule.
Set the monitoring rule.
Item Description
Rule Name Set a name for the rule.
Trigger Source Select the attribute to trigger monitoring.
Trigger Actions See Alarm-triggered Actions for details.
Click OK .
5.6.21 Advanced Settings
Advanced settings include snapshot clarity and detection mode for smart functions.
1. Photo
Go to Setup > Intelligent > Advanced Settings > Photo Parameters .
Select to enable or disable object overlay on the image.
Adjust the thumbnail image clarity. Please disable
Face Detection before setting the photo
parameters.
Click Save .
2. Detection
Go to Setup > Intelligent > Advanced Settings > Detection Parameters .
Set the detection parameters.
Item Description
Detection Mode
Select the detection mode.
Filter Repeated Motion Mode is used to prevent repeated alarm reporting caused by repeated
motion detected in the surveillance scene.
Sync Intelligent Mark
with Video
When enabled, the intelligent mark will follow the detected object.