Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 81)

76
Item Description
Time
Threshold(s)
Set how long the object is removed from the detection area to trigger an alarm.
If an object is removed from the detection area for the set time, an alarm will be triggered.
Sensitivity
Set the detection sensitivity.
The higher the sensitivity, the more likely object removal behaviors will be detected, and the
more likely false alarms will occur.
Set the alarm-triggered actions and arming schedule. See Alarm-triggered Actions and Arming
Schedule for details.
Click Save .
5.6.8 Object Left Behind Detection
Object left behind detection detects objects left behind in a user-specified area. The camera reports an
alarm when the detection rule is triggered.
Go to Setup > Intelligent > Smart .
Select Object Left Behind and click to configure it.
Add a detection rule.
(1) Click to add a detection area. The detection area is a hexagon by default. Up to 4 detection
rules are allowed.
(2) Adjust the position and size of the area or draw an area as needed.
 Adjust the position and size of the area.
̶ Point to a border of the area and drag it to the desired position.