Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 77)

72
Select Leave Area and click to configure it.
Add a detection rule.
(1) Click to add a detection area. The detection area is a hexagon by default. Up to 4 detection
rules are allowed.
(2) Adjust the position and size of the area or draw an area as needed.
 Adjust the position and size of the area.
̶ Point to a border of the area and drag it to the desired position.
̶ Point to a handle of the area and drag to resize it.
 Draw an area.
Click on the image and drag to draw a line. Repeat the action to draw more lines to form an
enclosed shape as needed. Up to 6 lines are allowed.
Set the detection rule.
Item Description
Sensitivity
Set the detection sensitivity.
The higher the sensitivity, the more likely cross line behaviors will be detected, and the more
likely false alarms will occur.
Level
Select the priority of the detection rule, including High , Medium , and Low .
The camera detects the rule that is triggered first by default. If multiple rules are triggered at
the same time, the camera detects the rule with higher priority.
Detection Object
Select the object to be detected, including Motor Vehicle , Non-Motor Vehicle , and
Pedestrian .