Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 38)

33
Item Description
SNMP Type Select SNMPv2 . After you select SNMPv2, a message pops up to remind you of potential risks
and ask if you want to continue. Click OK .
Read Community The default read community name is public, and you may change it as needed. Make sure the
read community names of the server and camera are the same, otherwise the two-way
authentication will fail.
Trap Server Address Set the trap server address in Management Server .
SNMP Port The default SNMP port number is 161. You may change it as needed.
Click Save .
5.2.8 802.1x
802.1x provides authentication to devices for access to the network and enhances network security by
allowing only authenticated devices to access.
Go to Setup > Network > 802.1x .
Enable 802.1x .
By default, the protocol is set to EAP-MD5. Select the same EAPOL version as that of the router or
the switch.
Enter the username and password for authentication.
Click
Save .
5.2.9 QoS
QoS (Quality of Service) has the ability to guarantee the performance of high-priority services under
limited network capacity.
Go to Setup > Network > QoS .
Set a priority level (0 to 63) for each service.