Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 111)

106
CAUTION!
• Strictly follow the instructions below when powering on external alarm devices (e.g., alarm light) to
avoid device damage.
• Check that Alarm Type is set to Normally Open (default) on the camera. Make sure the camera
and the external alarm device are disconnected from power.
• After you connect the alarm device to the camera, connect the alarm device to power first, and
then connect the camera to power.
5.7.2 One-key Disarming
The camera cannot trigger linked actions when disarmed.
Go to Setup > Events > One-key Disarming .
Choose a disarming mode.

Disarm by Schedule: Disarm according to a weekly schedule.

Disarm Once: Disarm during a specified time period.
Configure disarming schedule or time according to the disarming mode you chose. The disarming
schedule or time applies to all the actions selected.

Disarm by schedule: Click to configure disarming time.

Disarm Once: Set the disarming time.
Choose actions to be disarmed. The actual actions available, for example, for example, alarm light,
alarm sound, email, alarm output, may vary with camera model and version.
Click Save .
5.8
Storage
Go to Setup > Storage > Storage .