Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 62)

57
Aperture
Control
Select automatic or manual iris control.
NOTE!
This parameter is configurable when Lens Type is P-IRIS .
F-Number Set the f-number to adjust the iris opening manually.
Use
Recommended
Value
The camera optimizes the iris opening based on the current lighting conditions.
To restore defaults, click
Default .
9. Dewarping
Dewarping is used to correct distorted images caused by wide-angle lenses.
On the Image page, click Advanced .
Enable Dewarping and set the dewarping level as needed.
To restore defaults, click Default .
10. Image Stabilization
A camera mounted outdoors may be shaken by external forces (e.g., wind), causing image blur. In this
case, you can enable image stabilization to ensure the image quality.
On the Image page, click Advanced .
Select On or Off to enable or disable image stabilization.
To restore defaults, click Default .
11. Fusion Mode
In fusion mode, the object details on the visible image are overlayed on the thermal image, so that you
can see the object details on the thermal image as well.
On the Image page, select Channel 2 and click Fusion Mode .
Select On to enable fusion mode.
Set the fusion percentage.
Item Description
Image Fusion
Percentage
The greater the value, the closer the thermal image effect is to the visible image effect.
Image fusion percentage: 0 Image fusion percentage: 100
Edge fusion percentage: 50 Edge fusion percentage: 50