Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 59)

54
Enable Smart Illumination .
Set the smart illumination parameters.
Item Description
Illumination
Mode

Infrared: The camera uses infrared light illumination.

White Light: The camera uses white light illumination.

Warm Light: The camera uses warm light illumination.

Laser: The camera uses laser light illumination.
NOTE!
Before you select Warm Light , please set the Port Mode to Illumination (go to Setup >
System > Ports & Devices > Serial Port).
Control Mode

Global Mode: The camera automatically adjusts illumination and exposure to achieve the
balanced image effect. Some areas might be overexposed if you select this option. This option
is recommended if you focus on the monitoring range and image brightness.

Overexposure Restrain: The camera automatically adjusts illumination and exposure to avoid
regional overexposure. Some areas might be dark if you select this option. This option is
recommended if you focus on the clarity of the monitoring center area.

Road: This mode offers a strong overall illumination and is recommended for monitoring wide-
range scenes, for example, road.

Park: This mode offers a uniform illumination and is recommended for monitoring small-range
scenes with many obstacles, for example, park.

Custom Level: This mode allows you to manually control the intensity of illumination.

Custom Level(Always On): In this mode, the illumination is always on.
Illumination
Level
Set the intensity of the illuminator. The greater the value, the higher the intensity. 0 is off.

Near-illumination Level: Recommended for near focus scenes.

Mid-illumination Level: Recommended for medium distance focus scenes.

Far-illumination Level: Recommended for far focus scenes.
NOTE!
This parameter is configurable when Control Mode is set to Custom Level .
To restore defaults, click Default .
5. Focus
On the Image page, click Focus .