Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 27)

22
5
Setup
5.1
Local Parameters
Set local parameters for your PC, including smart, video, recording and snapshot.
NOTE!
The local parameters displayed may vary with camera model.
Go to Setup > Common > Local Parameters .
Set local parameters as needed.
Item Description
Smart
Intelligent Mark
This function shall be used with Cross Line Detection , Intrusion Detection , Enter
Area , Leave Area , Mixed-Traffic Detection , and Face Detection .
Object Attributes When enabled, the attributes of detected objects appear on the live view page.
Font Size Set the font size of object attributes, including Large , Medium , and Small .
Display Human
Body Snapshot
When enabled, human body snapshots appear on the live view page.
NOTE!
Only effective when face detection is enabled.
Video
Display Mode
Set the display mode according to the network status, including Min. Delay ,
Balanced , and Fluent (from low delay to high delay). You may also customize
the display mode as needed.
Protocol
Set the protocol used to transmit media streams to be decoded by the PC,
including TCP and UDP .
Recording and
Snapshot
Recording

Subsection By Time: Length of each local recording file. For example, 2
minutes.

Subsection By Size: Size of each local recording file. For example, 10MB.