Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 88)

83
Monitoring
Type
Description
Monitoring Task Select to enable or disable the monitoring task.
Monitoring Task
Name
Enter a name for the monitoring task.
Cause of
Monitoring
Enter the cause of the monitoring task.
Monitoring Type
Select the monitoring type.

All: The camera reports an alarm and performs the set alarm-triggered actions once it
detects a face.

Match Alarm: The camera reports a match alarm and performs the set alarm-triggered
actions when the similarity between a captured face and a face in the monitored face
library reaches the confidence threshold.

Not Match Alarm: The camera reports a not match alarm and performs the set alarm-
triggered actions when the similarity between a captured face and a face in the monitored
face library fails to reach the confidence threshold.
Confidence
Threshold
By default, the confidence threshold is set to 80. A match alarm/not match alarm occurs
when the similarity between a captured face and a face in the face library reaches/fails to
reach the threshold.
The higher the value, the more accurate the face recognition.
(3) Select the face library to be monitored.
(4) Set the alarm-triggered actions and arming schedule. See
Alarm-triggered Actions and Arming
Schedule for details.
(5) Click OK .
Click Save .
5.6.13 Human Body Detection
Human body detection detects humans in a specified area. The camera reports an alarm when the
detection rule is triggered.
Go to Setup > Intelligent > Smart .
Select Human Body Detection and click to configure it.
Add a snapshot area.
(1) Click . The snapshot area is a hexagon by default. Only one snapshot area is allowed.