Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 58)

53
Slow Shutter
Increase image brightness in low light conditions.
NOTE!
This parameter is configurable when Exposure Mode is not set to Iris Priority and Image
Stabilization is disabled.
Slowest Shutter Set the slowest shutter speed for exposure.
Compensation
Adjust the compensation value as required to achieve the desired image effect.
NOTE!
This parameter is configurable when Exposure Mode is not set to Manual .
Restore Auto
Exposure(min)
Set the duration for the camera to restore automatic exposure mode.
Metering
Control
Set how the camera measures the intensity of light.

Center-Weighted Average Metering: Measure light mainly in the central part of the image.

Evaluative Metering: Measure light in the specified area of the image.

Spot Metering: Similar to evaluative metering. But it cannot increase the brightness of images.

Face Metering: Adjust image quality in poor lighting conditions by controlling the brightness of
captured faces in face scenes.
NOTE!
This parameter is configurable when Exposure Mode is not set to Manual .
Day/Night
Mode

Automatic: The camera automatically switches between day mode and night mode according
to the ambient lighting condition to output optimum images.

Day: The camera outputs high-quality images in daylight conditions.

Night: The camera outputs high-quality images in low-light conditions.

Input Boolean: The camera switches between day mode and night mode according to the
Boolean value input from a connected third-party device.
NOTE!
The Input Boolean option is only available on certain models.
Day/Night
Sensitivity
Light threshold for switching between day mode and night mode. A higher sensitivity value
means that the camera is more sensitive to the change of light and is therefore more easily to
switch between day mode and night mode.
NOTE!
This parameter is configurable when Day/Night Mode is set to Automatic .
Day/Night
Switching(s)
Set the length of time before the camera switches between day mode and night mode after the
switching conditions are met.
NOTE!
This parameter is configurable when Day/Night Mode is set to Automatic .
WDR
Enable WDR to ensure clear images in high contrast conditions.
NOTE!
This parameter is configurable when Exposure Mode is set to Automatic , Custom , Shutter
Priority , Indoor 50Hz or Indoor 60Hz and when Image Stabilization and Defog are disabled.
WDR Level
Adjust the WDR level.
NOTE!
Level 7 or higher is recommended if there is a high contrast between the bright and dark areas in
the scene. In the case of low contrast, it is recommended to disable WDR or use level 1 to 6.
WDR On/Off
Sensitivity
When WDR is set to Automatic , adjust the parameter to change the WDR switching sensitivity.
Suppress WDR
Stripes
When enabled, the camera automatically adjusts the slow shutter frequency according to the light
frequency to minimize stripes in the image.
To restore defaults, click
Default .
4. Smart Illumination
On the Image page, click Smart Illumination .