Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 65)

60
Set the OSD position and content.
Item Description
Enable
Select the check boxes in the Enable column to overlay the corresponding contents on the
live video.
NOTE!
Up to 8 overlays allowed.
Overlay OSD
Content
Set the OSD content you want to overlay. Point to the OSD content, click , select the OSD
content from the drop-down list or customize it.
Some OSD contents are described below.

Preset: When you call a preset, the preset ID will be displayed on the live image, such as
"Preset 1".

People Counting: Before use, you need to enable and configure People Flow Counting ,
Crowd Density Monitoring , or Face Detection , then you can view the people flow
information (number of people entering/leaving), crowd density information (number of
people present), or face detection information (number of people entering/leaving) on the
live image.

Motor Vehicle&Non-Motor Vehicle&Pedestrian Count: Before use, you need to enable
Mixed-Traffic Detection and Motor Vehicle&Non-Motor Vehicle&Pedestrian Count ,
then you can view motor vehicle/non-motor vehicle/pedestrian counting information on
the live image.
NOTE!
• The OSD content only takes effect after you select the Enable check box.
• Some models allow different OSD contents in one overlay area.
X-Axis/Y-Axis
Specify the exact position of the OSD by entering the X and Y coordinates.
Take the top left corner of the image as the origin coordinates (0, 0), the horizontal axis is the
X-axis, and the vertical axis is the Y-axis.
NOTE!
You can also set the OSD position as follows: point to the OSD box in the preview window,
drag the box to the desired position after the cursor shape is changed.
indicates the OSD overlay is set successfully.
/ Use the two buttons to rearrange the OSDs.