Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 72)

67
Alarm Sound
The camera plays warning sounds when an alarm occurs.
1. Select the Alarm Sound check box and click to configure relevant parameters.
2. Set the arming schedule for audible alarms. See Arming Schedule for details.
3. Set the alarm audio content and alarm times.

Audio: Set the audio content to be played when an alarms occurs. See Audio File for details.

Repeat: Set the number of times the audio to be played when an alarm occurs.
NOTE!
This function may vary with device model.
Alarm Light
The illuminator of the camera flashes for a certain period of time when an alarm occurs.
1. Select the Alarm Light check box and click to configure relevant parameters.
2. Set the duration that the illuminator flashes when an alarm occurs.
3. Set the arming schedule for visible alarms. See
Arming Schedule for details.
NOTE!
This function may vary with device model.
Recording Edge
Storage
The camera saves alarm recordings to its memory card or NAS when an alarm occurs.
Please configure
Memory Card or Network Disk first before use.
Image Edge Storage
The camera saves alarm snapshots to its memory card or NAS when an alarm occurs.
Please configure
Memory Card or Network Disk first before use.
FTP Video Storage
The camera uploads alarm recordings to the specified FTP server when an alarm occurs.
Please configure
FTP first before use.
Trigger Tracking
The camera starts tracking the object that triggers the alarm automatically until the set tracking
time is reached or the object disappears when an alarm occurs.
You can click
Tracking to configure tracking parameters. See Tracking for details.
Go to Preset
The camera automatically goes to a preset position when an alarm occurs.
Select the preset position you want the camera to go to. See
PTZ for details.
5.6.2 Arming Schedule
You can set an arming schedule to determine when the camera performs detection.

Draw a schedule