Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 125)

120
Go to Setup > System > Time .
Set system time.

Set manually in the Set Time field.
NOTE!
Make sure Sync Mode is set to Sync with System Configuration ; otherwise, the device time will still
sync with other sources after you set it manually.

Sync time
Item Description
Sync with System
Configuration
Default. Time provided by the system’s built-in time module.
Sync with Latest Server
Time
The camera regularly syncs time with all the connected servers.
Sync with Management
Server(Non-ONVIF)
The camera regularly syncs time with the server that is not connected via Onvif.
Sync with Management
Server(ONVIF)
The camera regularly syncs time with the server that is connected via Onvif.
Sync with NTP Server
The camera syncs time with the NTP server, for which you need to configure the
server address, port, and update interval.
Sync with Cloud Server
The camera syncs time with the cloud server once when it gets online, and does not
sync again until it gets offline.
BeiDou Module Auto Sync The camera syncs time with BeiDou satellites through the BeiDou module (if
equipped).
Sync with Computer Time The camera syncs time with the client computer from which you log in to the camera.
Click Save .
5.10.2 DST
Go to Setup > System > Time > DST .
Enable DST, and set the start time, end time, and DST bias.
Click
Save .