Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 108)

103
Set alarm linkage and an arming schedule. See Alarm-triggered Actions and Arming Schedule for
details.
Click Save .
4. Alarm Input
The camera can receive alarms from external third-party devices such as infrared detectors, smoke
detectors, etc. After alarm input is configured, the third-party device can send signals to the camera after
an event occurs.
Go to Setup > Events > Common Alarm > Alarm Input .
Choose an alarm input from the drop-down list.
The number of alarm inputs available may vary with camera model. For example, if the camera has two
alarm inputs on the tail cable, you can configure alarm input 1 and alarm input 2 separately.
Configure alarm input.
Item Description
Alarm
Name
The default name is the alarm input channel ID. You rename it as needed.
Alarm ID Set an alarm ID as you need.
Alarm
Type
Set the alarm type according to the alarm input device.

If the alarm input device is normally open (N.O.), choose N.C. .

If the alarm input device is normally closed (N.C.), choose N.O. .
Alarm
Input
Click On to enable Alarm Input .
Set alarm linkage and an arming schedule. See Alarm-triggered Actions and Arming Schedule for
details.
Click Save .
5. Alarm Output
The camera can output alarms to external third-party devices such as alarm bell, buzzer, etc. After alarm
output is configured, the camera can output alarm signals when an alarm (such as motion detection
alarm, tamping alarm) occurred and trigger the third-party device to perform certain actions.
Go to Setup > Events > Common Alarm > Alarm Output .