Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 54)

49
Set auto-switching conditions, including schedule, illumination and PTZ elevation. Auto switching
can only be triggered when all the set conditions are met.
Set the scene as the default scene.
(Optional) Enable auto switching.

When enabled, if the conditions for switching to a non-default scene are met, the camera will
automatically switch to the scene; otherwise, the camera uses the default scene.

After you select the Enable Auto Switching check box, all scene parameters cannot be configured.

If multiple non-default scenes meet the switching condition at the same time, the camera will switch
to the scene with the minimum number (starts from 1 to 5).
2. Image Enhancement
On the Image page, click Image Enhancement .
Set the image enhancement parameters.
Item Description
Brightness
The overall lightness or darkness of the image.
Low brightness High brightness